YaMoRC YD8248 Servo decoder 4x servo + 8x licht

The future for servo control on your model railway

Deliverable around the end of August, September 2024. subject to production delays The YaMoRC solution for controlling RC Servos. It has the following features: + 4 Servo connectors in standard configuration, each servo has: + Analogue input for position and/or configuration + 4 digital inputs for analogue/conventional control of up to 4 positions. (no digital command station required !!!) + Selectable servo displacement: 90 or 180 degrees. Supports 90'and 180' servos. + Up to 4 point piece polarisation relays ( option Adapter YD8290 ) for the 4 standard servos + Point piece polarisation by 2 independent relays, both are off while the servo is moving to avoid short circuits on "difficult" points. + Up to 12 servos in total by using option adapter YD8291 + Eight independent 2.5 Amp MOSFET auxiliary outputs + Selectable "common voltage" between 5V or the rectified input voltage. + Max 2.5 Amp combined current. + Full aspect configuration as in our YD8116 + Very simple basic setting (base address) by pressing the programming button and selecting the desired switch address + No complicated CV settings. + Clear text configuration based on our new ES-Link technology. + Using the classic Windows PC interface, the YD9100 config-USB stick as well as our YD6016LN/RB and ... + Our YD7001 and YD7010 Command Stations can also provide configuration. + All 8 outputs are freely configurable from 8x simple on-off to complex and extended signals with up to 8 LEDs/lamps. + Each defined device (Servo, Signal, Switch, Switch) can have its own address + Devices/Servos can be controlled by the new DCCext standard or conventional DCC commands for switches (throw/close) + Not suitable for solenoid turnout motors. For these motors, use our YD8008/YD8044. + The auxiliary outputs are also very suitable for motorised turnout motors. For two-wire motorised AC motors, such as Conrad; Hoffmann; Tillig; etc., adapter YD6940 should be used. + 2A max. contact current